PROPAN EPOXY BOND MARINE EWA-135

PROPAN EPOXY BOND MARINE EWA-135 is a two component epoxy adhesive special formulated for adhesive and filler. It provides outstanding adhesion property, can be applied under water, non sagging, fast dry and easy to use.

Advantages :

  • Non sagging
  • Waterproof
  • Can be applied under water
  • Fast dry
  • Excellent bonding

Packaging : 2 Kg-Set


5 stars - based on 423 reviews
Application Procedures :

Surface preparation
Surfaces must be free from dust, moss, mud, oil, paint peeling or other contaminant.

Application procedure
1. Mix Component A (Resin) and Component B (Hardener) with a ratio of 1: 1 (in weight), mix until homogen.
2. Use scrapper to apply a mixture on the part to be glued.
3. Glue both surfaces and hold for 1-3 minutes so that the position of both surfaces not shift.
4. Immediately clean the excess glue is still wet.
5. Leave it completely dry for 24 hours or until the glue is perfectly dry.

Age of mixture (pot life): maximum 45 minutes
  PROPAN EPOXY BOND MARINE EWA-135
Type 2K Epoxy
Color Milky
  A Component B Component
Appearance Greyish Liquid Paste Yellowish Liquid Paste
Solid Content (NV, w/w) 96 ± 1 % 93 ± 1 %
Specify Grafity 1,6 ± 0,04 gr/ml 1,7 ± 0,04 gr/ml
Flash Point 190oC 290oC
Viscosity 400.000 ± 50.000 cps 500.000 ± 50.000 cps
Drying Time Surface Dry : 30 Minutes ( 30oC )
Hard Dry : 150 Minutes ( 30oC )
Full Cure : 16 Minutes (  30oC )