PROPAN NO NAIL PNN  - 200  is a water based high strength construction adhesive with excellent fast grab and fast clean up that suitable to attach on most building substrate. This high tack adhesive can minimizes or eliminates the need for nails and screw in many DIY and repair jobs. This adhesive has a low odor and requires only soap and water to clean up. This makes it safe, easy to use and environmentally friendly. PROPAN NO NAIL PNN - 200 can be used on most building substrate, including :

  • Wood
  • MDF
  • Particle board
  • Plaster board
  • Styrene foam
  • Masonry & concrete
  • Tiles
  • Ceramics
  • Metal
  • Plastic*
  • Rubber*
  • Glass*
  • Skirting
  • Cornices
  • Architraves

*Pre-test to determine compatibility

Advantages :

  • Fast grab
  • Eliminates the need for nails
  • Waterbased, fast clean up with water (before dry)
  • Low odor

Packaging : 200 gr

5 stars - based on 624 reviews

Application rocedures :

  1. Ensure all surfaces are clean, dry and free from dust, dirt, oil, grease, and loosely other contaminant.
  2. Cut the tip of the cartridge, fit nozzle and cut to desired opening (±5-10 mm)
  3. Apply PROPAN NO NAIL along length of joist, stud, or batten. On board flat surfaces apply PROPAN NO NAIL every 40 cm.
  4. Bring surfaces together as soon as possible (within the first 5 min)
  5. For a large area use a temporary clamp or screw till PROPAN NO NAIL dry perfectly.
  6. For use in a small area use PROPAN NO NAIL on one surface only, then press fully and together. Allow to dry for 15-30 minutes.
  7. To get the perfect adhesion, remove the temporary clamp or screw after 24 hours. Use a mechanical clip to get the perfect adhesion.
Appearance Colored paste
Color White
Chemical type Acrylic water based
Solid by volume 60 %
Specific gravity 1.40 g/cc
Working time 15 minutes at 30ºC
Drying time 24 hours at 30ºC
Full cure Minimum 7 days (depend on temperature and thickness)
Application condition 25 - 35oC, 60 - 80%RH