CERAKOTE CTC-998

CERAKOTE CTC-998 is package system for interior ceramic tile reconditioning in areas such as bathroom area, etc. Old ceramic tiles become new and clean again without removal. CERAKOTE CTC-998 consist of one set of Water Based primer coat (CTP-980 WB) and two set of Top Coat (CTC-998). CERAKOTE is made by high quality resin with excellent adhesion and good resistance against house hold chemicals such as : detergent, soap, cleaning fluids, etc

Features & Benefit :
• Consist of Waterbased Primer, no odor
• Excellent adhesion on ceramic tile
• Excellent water resistance
• Excllent scratch resistance
• Easy to apply, just brush and roll

Packaging : 3 lt-set


5 stars - based on 696 reviews

Application Procedures :

PRIMER COAT

  1. Clean ceramics tile surfaces to be painted from oil, dirt, crust, fungus, and other containants. Sand throughly. Surface must be dry before painting.
  2. Mix one set of Primer Coat (CTP-980 WB) with mixing ratio by weight Primer component A : Primer component B = 4 : 1. Stir until homogeneous. Can be thinning by water 5-10% (only when necessary). The mixture will harden in 60 minutes, mix as much as needed. Coverage is 10 m?2;/kgset per coat.
  3. Apply mixed material using roller / brush. To achieve smooth surface, use a good quality roller.
  4. After the primer (CERAKOTE CTP-980) is dry (minimum overnight), sand with sandpaper no. 400. Then, clean the dust of the sandpaper.
  5. Mix a set of CERAKOTE CTC-998 with the weight ratio of the comp. A: Komp. B = 4: 1. Dilute using 5-10% epoxy thinner, stir until smooth.
  CERAKOTE CTC-998
Type Two water based epoxy primary components
Finish Gloss
Material consumption 11 m2 /lt-set (40 micron/layer)
Drying time Hard dry 12 hours (30° C)
Full Cure 7 days
Packaging 3 lt-set
Self Life 1 year in unopened container
Thinner Thinner Epoxy atau Thinner D
Application method Epoxy roller or brush
Cleaning After use, wash equipments immedaitely