FAST DRY EPOXY FLOOR COATING EP-95-2K FD

Propan EPOXY FAST DRY EP-95-2K FD is a new development from R&D Propan Raya. Fast dry epoxy floor coatings. Only 4 hours drying time and ready for use. Specially designed as top coat require 100-200 micron dry film thickness. Not only for floor coating, but also recommended for wall. Can be applied on concrete, metal, wood, gypsum, mdf board, concrete ceramic, etc


Product Characteristic :

  • Fast dry
  • Excellent water resistance
  • Excellent adhesion to substrate
  • Easy to clean
  • Easy to use
  • Chemical resistance
     

Video Application : 


5 stars - based on 867 reviews

   Application Procedure :  

 

  1. Clean the surface from dust, oil and other contaminants. Make sure the floor surface clean and dry before apply.
  2. Mix comp A and B with mixing ratio 2 : 1 by weight. Stir well ± minutes and apply the mixture by brush or roll.
  3. If necessary, mixture can be thinned with epoxy thinner 5-10%.

 

  EPOXY FAST DRY EP-95-2K -FD
Type Two Component Epoxy Fast Dry
Finish High Gloss
Theorithical coverage 4-5 m2/kg-set (±100 micron DFT)
Drying time Surface dry 2 hours (30° C)
Full cure 4 hours (30° C)
Package 1,5,12 kg-set
Shelf life 1 years in unopened factory sealed container.
Diluent Thinner Epoxy, 5%-10%
Application method Roll, brush
Cleaning Wash all equipments immediately with clean water, after use.