DECORSHIELD DW - 500

DECORSHIELD Acrylic Exterior Shield DW-500 is an exterior decorative paint made from 100% acrylic emulsion and UV resistant color pigments. It provides protection for six years from weather, UV light, fungus, mold and algae. DECORSHIELD Acrylic Exterior Shield DW-500 has low dirt pick-up, good alkaline resistance, bright colors and excellent color retention. This product is designed for extrerior wall and ceiling surfaces including brick work, cement plaster, concrete, GRC panel, etc.


Features Benefit :

  • Color Shield
  • Excellent Opacity
  • Washable
  • Rainproof and Weather Resistant
  • Fungus Resistant
  • Dirt Shield

Packaging : 2.5 Liter and 25 Liter

Color Card

? ?

 


5 stars - based on 843 reviews
APPLICATION PROCEDURE

Surfaces preparation for new / unpainted wall
  1. Surfaces must be dry, clean and free from oil contaminants. Newly build wall must be dry after 28 days old.
  2. Area of defect, like crack or existence of puncture, repair using materials mixture of PROCRETE Cement Filler CF - 700 with PROCRETE Bonding Agent BDA-810 and water.
  3. Make sure moisture content / dampness of wall 16% measured using Protimeter appliance and wall alkalinity (pH) 7-8 measured using Universal pH indicator.
Surfaces preparation for old/painted wall
  1. Check the surfaces, old paint that have adhesion problem must be removed from the surface.
  2. Area of defect, like crack or existence of puncture, repair using materials mixture of PROCRETE Cement Filler CF - 700 with PROCRETE Bonding Agent BDA - 810 and water.
  3. Old wall surfaces that affected by mold and fungus must be treat by PROPAN FUNGICIDAL WASH.
  4. Before painting work begin, make sure the surfaces are dry, clean and free from all contaminants.

Painting
  1. Primer coat: DECOR Alkali Resisting Primer AS - 300 (Water Based) 1 coat (1 x 20 microns without thinning); or use DECOR Alkali Resisting Primer AS - 310 (Solvent Based) for concrete wall with higher alkalinity.
  2. After primer coat has dried, check all surface paint whether there are defects like crack or existence of puncture. If there is part of wall defect, repair using materials mixture of PROCRETE Cement Filler CF - 700 with PROCRETE Bonding Agent BDA - 810 and water. Afterwards apply primer coat once again at parts of repaired, then let it run dry minimal 2 hours.
  3. Finish coat: DECORSHIELD Acrylic Exterior Shield, 2 coats (2 x 30 microns, thinning with 10 - 20% clean water according to application need).


TECHNICAL DATA

Type Pure Acrylic Emulsion
Color 50 colors to choose
Specific Gravity ± 1.40 gr/cc (depend on color)
Solid by Volume ± 38 %
Material Consumption ± 12.7 m2/ltr (30 microns dry film thickness)
Application Tools Brush, roll, air spray, airless spray
Diluent Clean water ± 10%
Drying Time 60 minutes (30°C)
Recoating Interval Minimum 2 hours (30°C)