ECOSHIELD ES - 600

ECOSHIELD ES - 600 Acrylic Exterior Shield is a decorative wall paint made from acrylic emulsion and special color pigment. ECOSHIELD Exterior Acrylic Emulsion Paint has low dirt pick up, good alkaline resistance, protection from weather, ultra violet light, fungus, mold, and algae, has bright colors, and excellent color retention. This product is designed for exterior wall such as brick work, cement plaster, concrete, gypsum board, GRC panel, etc.


Features & Benefit
  • No added lead or mercury
  • Fungus Resistant
  • Color Shield
  • Excellent Opacity
  • East to apply and easy to dry
  • Weather Resistant (until 4 years)
 
Packaging : 5 kg and 25 kg

Video Training Product

Color Card


 * 
 
 


5 stars - based on 738 reviews
APPLICATION PROCEDURE

1. Surface Preparation
Surface must be dry, clean, and free from dirt, grease, oil, and all contaminants. Clean any area that are affected by mold, moss, and fungus with FUNGICIDAL WASH.

2. Primer Coat
Eco Emulsion Alkali Resisting Primer EAR-4001 (Water Based), 1 coat (without thinning), or use
Decor Alkali Resisting Primer AS-310 (Solvent Based), 1 coat (without thinning) for surface with very high alkalinity.

3. Top Coat
ECOSHIELD Exterior Acrylic Emulsion Paint, 2 coats (thinning with 10 - 20 % clean water according to needs)

*Recoating Interval : Minimum 2 hours (at temperature of 30°C)

DATA TEKNIS PRODUK

  ECOSHIELD ES - 600
Tipe Acrylic emulsion
Warna Seperti terlihat di color card
Tampilan akhir Matt
Kadar padatan dalam volume 32 %
Berat jenis 1.36 gr/cc
Daya sebar teoritis 7.8 m2 / Kg ( 30 micron )
Kecepatan kering Tergantung pada suhu dan kelembaban
Kering permukaan = 1 Jam ( 30o C )
Masa simpan 1 Tahun jika tersimpan dalam keadaan sejuk dan kering serta kemasan tidak dalam keadaan terbuka (jangan disimpan dibawah titik beku)


DATA TEKNIS APLIKASI

Pengencer Air bersih
Jumlah pengencer dalam volume 10 - 20 %
Cara aplikasi Kuas, roll, spray atau airless spray
Ketebalan lapisan cat basah 80 micron atau 3.2 mil
Ketebalan lapisan cat kering 30 micron atau 1.2 mil
Ketebalan lapisan cat kering yang direkomendasikan 60 micron ( 2 x 30 micron )
Selang waktu pengecatan Minimal 2 jam ( 30O C), sesudah lapisan film cat pertama kering
Maksimum -