PROPAN EPOXY CAST EC-973

PROPAN EPOXY CASTING EC-973 is 2-component epoxy paint that is very suitable for top table finish, or making souvenirs by cast. Propan Epoxy Cast is also suitable for producing a table finish with a very thick film, close pore, and high gloss by polishing after the results of perfect dry casting.

 

Features :

  • The film layer is more clear & transparent
  • Easy to apply
  • Smells good
  • The film layer does not shrink

 

Packaging : 1.5 Litre Set & 15 Litre Set

 

Product Application Video

 


5 stars - based on 733 reviews

APPLICATION METHOD

 

1. Surface Preparation

  • Clean the wood surface, substrate or mold that will be poured with Propan Epoxy Cast so that it is clean of oil, dirt, mold, or other contaminants.
  • Sand the wood using sandpaper.

2. Mixing Propan Epoxy Cast

  • Mixing component A and component B with  a ratio of A : B = 2 : 1.
  • Stir thoroughly.
  • Let the mixture stand for 2-5 minutes so that the air bubbles in the mixture can break.
  • Then pour this mixture into the mold or substrate container that you want to cast.
  • Immediately do the casting after component A and component B are stirred evenly. The mixtures will thicken (reach pot life) after 25 minutes. Then the casting process must be done before reaching potlife.

 

3. Drying Time (at room temperature 30°C)
     Dry surface  : 3 hours
     Hard dry  : 8 hours
     Perfect dry  : 7 days

 

  PROPAN EPOXY CAST EC-973
Type Two Component Epoxy
Colors Clear (Transparant)
Application Condition 25 - 30°C, 40 – 60% RH
Mixing ratio 2 : 1
Material Consumption 0.42 kg/m?2; for 0,1 mm
Drying Time 7 days
Hardener ECH-973 PS
Pot Life 25 minutes (30°C)