Share to :

Decorlotus

DECORLOTUS Easy To Clean + Anti Bacterial Paint DLI – 480 is a premium interior wall paint with Microban® anti-stain and anti-bacterial formulation that easily removes stains and provides effective protection from bacteria, germs and mold. This product contains TEFLAR Fluoropolymer anti-stain, water repellent with Pearl Lotus Effect, washable, easy to clean, easy to apply, good coverage & excellent spreadability, minimal paint splatter.

DECORLOTUS Easy To Clean + DLI – 480 Anti Bacterial Paint can be applied to interior wall surfaces such as brick work, cement plastering, concrete, gypsum, GRC panels, wood, plywood, etc., for painting interior walls and ceilings in hospitals, pharmaceuticals, bedrooms, schools, offices, hotels, public spaces, restaurants, food and beverage industries, and others.

Advantages and Benefits:
TEFLAR Anti Stain & Lotus Effect; Easy to clean
MICROBAN Anti Bacterial; Maintain your health
ULoV (Ultra Low Odor & VOC); No pungent odor
Excellent Sealability; Faster painting
Minimal Paint Splatter; Clean hands and floors
Singapore Green Label; Safe for health

Available packaging: 2.5 liters and 20 liters

NEW PAINTING
1. Surface preparation

All wall surface defects such as hair cracks or small holes, repaired using PROCRETE Cement Filler CF – 700 mixed with PROCRETE Bonding Agent BDA – 810 and water, then let dry at least 5 (five) days.
Make sure the moisture content of the wall is 16% measured using a Protimeter tool and the wall alkaline content (pH) is 7 – 8 measured using a Universal pH indicator tool.
The surface of the wall must be cleaned of dirt, dust, grease, oil, residual cement water and others.

2. Base Coat

Apply 1 (one) coat of DECOR Alkali Resisting Primer AR – 300 (Water Based) without dilution or use DECOR Alkali Resisting Primer AS – 310 (Solvent Based) without dilution using a roll for wall surfaces with very high alkali content. Allow this primer coat to dry for at least 2 (two) hours.

3. Touch Up

Recheck the entire surface of the wall that has been primed, if defects are found such as hair cracks or small holes, make local repairs using DECOR Wall Filler DWF – 200 using a kape application tool, then let it dry ± 2 – 24 hours, depending on the thickness.
Reapply primer, especially on the repaired parts, then let it dry for at least 2 (two) hours.

4. Final Coat

Apply 1 (one) coat of DECORLOTUS Interior Wallpaint With Pearl Lotus Effect DLI – 480 finish paint, diluted with clean water 10 – 20% by volume, using a roll. Then let this first coat of paint finish dry for at least 2 (two) hours.
Do it again until the third layer (if the color of the second layer has not closed completely)

REPAINTING (OLD PAINT WAS DAMAGED & AND PEELED OFF)
1. Surface Preparation
Check the condition of the old paint that is still attached to the wall, if the old paint is damaged or chalking or peeling, then take the following steps :

Peel off all the old paint using PROPAN Paint Remover PPR – 735 (blue can) until it reaches the wall, then clean and let it dry.
The entire defective wall surface is repaired using PROCRETE Cement Filler CF – 700 mixed with PROCRETE Bonding Agent BDA – 810 and water, then let it dry completely for at least 5 (five) days.
Make sure the moisture content of the wall is 16% measured using a Protimeter tool and the wall alkaline content (pH) is 7 – 8 measured using a Universal pH indicator tool.
The surface of the wall must be cleaned of dirt, dust, grease, oil, residual cement water and others.

2. Base Coat

Apply 1 (one) coat of DECOR Alkali Resisting Primer AR – 300 (Water Based) without dilution or use DECOR Alkali Resisting Primer AS – 310 (Solvent Based) without dilution using a roll for wall surfaces with very high alkali content. Allow this primer coat to dry for at least 2 (two) hours.

3. Touch up

Recheck the entire surface of the wall that has been primed, if defects are found such as hair cracks or small holes, make local repairs using DECOR Wall Filler DWF – 200 using a kape application tool, then let it dry for ± 2 – 24 hours, depending on the thickness.
Reapply the base paint, especially on the repaired parts, then let it dry for at least 2 (two) hours.

4. Final Coat

Apply 1 (one) coat of DECORLOTUS Interior Wallpaint With Pearl Lotus Effect DLI – 480 finish paint, diluted with clean water 10 – 20% by volume, using a roll. Then let this first coat of paint finish dry for at least 2 (two) hours.
Do it again until the third layer (if the color of the second layer has not closed completely)

REPAINTING (OLD PAINT IS STILL IN GOOD CONDITION & NOT PEELED OFF )
1. Surface Preparationn
If the condition of the old paint is still good, there is no peeling, then do the following steps:

Clean the entire surface of the old paint from dust and dirt by washing with a brush. & clean water or a damp cloth, then let it dry, or sand it using sandpaper size 180, then clean it from dust.
Make sure the water / moisture content of the wall is 16% measured using the Protimeter tool and the wall alkaline level (pH) 7 – 8 is measured using the Universal pH indicator tool

2. Base Coat

Apply 1 (one) layer of base coat DECOR Wall Sealer DWS – 380 (solvent based) or DECOR Wall Sealer DWS – 320 (water based) without dilution using a roll. Allow this base coat to dry for a minimum of 2 (two) hours and a maximum of 4 (four) hours.

3. Final Coat

Apply 1 (one) coat of finish paint DECORLOTUS Interior Wallpaint With Pearl Lotus Effect DLI – 480, which is diluted with clean water 10 – 20% by volume, using a roll. Then let this first coat of finish paint dry for at least 2 (two) hours.
Do it again until the third layer (if the color of the second layer has not completely covered)

Related Products

CR - 6100

DI - 400

STC - 240