Polyfloor Epoxy
POLYFLOOR EPOXY consists of 3 types:
1. Solvent Base = PFT-253-2K SB
2. Solvent Free = PFT-213-2K SF
3. Solvent Free Mastic = PFT-215 M-2K SF
Propan epoxy flooring above is formulated with carefully selected raw materials, resulting in a very even flooring with high abrasion resistance.
Polyfloor Epoxy is now available in a special bodycoat product, namely Polyfloor Epoxy PFP-221-2K SF BC is a two-component epoxy paint designed to increase the total thickness of the epoxy system. Can be applied to damp concrete up to 7% content.
SUPERIORITY:
- Not slippery anti-slip
- Easy to clean
- Decorative appearance
- Glossy appearance (gloss)
- High compressive strength
- Good adhesion on concrete
- Resistant to chemicals
- Resistant to abrasion
- Anti-fungal and waterproof
Packages available: 5 kg-set and 20 kg-set
APPLICATION PROCEDURE:
1. PFT-253-2K SB
Use PFT-253-2K SB product for top coat by mixing component A and component B with a weight ratio of 4 : 1. Stir using a mixer. for 1-2 minutes.
For top coat:
Pour the mixed product onto the floor and pull using a rubber squeegee, then smooth using a rubber roller. Material consumption is 1.80 kg-set/m2/layer with a dry thickness of 1000 microns for top coat.
Tips for Finishing Polyfloor Epoxy:
• Make sure the surface of the substrate is dry and clean from all types of contaminants
• Before applying, the surface of the substrate must be ground beforehand
• Use a good quality roll and application tool
Tips:
P FT-253-2K SB must be applied per layer with a thickness of 1000mic
2. PFP-213-2K SF
Use PFP-213-2K SF product for top coat by mixing component A and component B with a weight ratio of 2 : 1. Stir using a mixer for 1-2 minutes.
For top coat:
Pour the mixed product onto the floor and pull using a rubber squeegee, then smooth using a rubber roller. Material consumption is 1.5kg-set/m2/layer with a dry thickness of 1000 microns for top coat.
Polyfloor Epoxy Finishing Tips:
• Make sure the substrate surface is dry and clean from all types of contaminants
• Before applying, the substrate surface must be ground first
• Use good quality rolls and application tools
Tips:
PFP-213-2 K SF should be applied per layer with a thickness of 1000mic
3. PFT-215 M-2K SF
Use PFT-215 M-2K SF product for top coat by mixing component A and component B with a weight ratio of 7 : 1. Stir using a mixer for 1-2 minutes
For top coat:
Pour the mixed product onto the floor and pull using a rubber squeegee, then flatten using a rubber roller. Material consumption is 1.6kg-set/m2/layer with a dry thickness of 1000 micron for top coat
Polyfloor Epoxy Finishing Tips:
• Make sure the substrate surface is dry and clean from all types of contaminants
• Before applying, the substrate surface must be ground beforehand
• Use good quality rollers and application tools
Tips:
PFT-215 M-2K SF must be applied per layer with a thickness of 1000mic