Share to :

Eco Shield

ECOSHIELD ES – 600 Acrylic Exterior Shield is an exterior wall paint made from acrylic emulsion combined with selected color pigments. ECOSHIELD ES – 600 Acrylic Exterior Shield protects the exterior walls from weather influences, is resistant to UV rays and sun, mold and mildew resistant, has a brighter color, and does not fade easily. This product is suitable for application to exterior walls such as masonry walls, cement plaster, concrete, gypsum boards, GRC panels, and others.

Superiority :

Does not contain heavy metals
Anti-moss and anti-fungus
Color is not easy to fade
Very good covering power
Widespread power
Easy to apply and dries quickly
Weather resistance for 3 years

Packaging: 5 kg & 25 kg

APPLICATION PROCEDURE

NEW PAINTING
1. Surface Preparation

All wall surfaces with defects such as hairline cracks or small holes, repaired using PROCRETE Cement Filler CF – 700 mixed with PROCRETE Bonding Agent BDA – 810 and water, then let it dry for at least 5 (five) days.
Make sure the water content / humidity of the wall? 16% is measured using a Protimeter tool and the wall alkali content (pH) 7 – 8 is measured using a Universal pH indicator tool.
The wall surface must be cleaned of dirt, dust, grease, oil, remaining cement water and others .

2. Base Coat

Apply 1 (one) coat of ECO EMULSION Alkali Resisting Primer EAR – 4001 (Water Based) without dilution or use DECOR Alkali Resisting Primer AS – 310 (Solvent Based) without dilution using a roll for wall surfaces with very high alkaline levels. Allow this base coat to dry for at least 2 (two) hours.

3. Touch Up

Check the entire surface of the wall that has been primed again, if you find that there are still defects such as hairline cracks or small holes, do local repairs using PROCRETE Cement Filler CF – 700 mixed with PROCRETE Bonding Agent BDA – 810 and water, then let it dry for at least 5 (five) days
Re-apply the base paint, specifically on the repaired parts, then let it dry for at least 2 (two) hours.

4. Final Coat

Apply 1 (one) coat of ECOSHIELD Acrylic Exterior Shield ES – 600 finish paint, which is diluted with 10 – 20 ?rat of clean water, using a roll. Then let this first coat of finish paint dry for at least 2 (two) hours. REPAINTING (OLD PAINT HAS BEEN BROKEN & PEELED)
1. Surface Preparation
Check the condition of the old paint that is still attached to the wall, if the old paint is damaged or calcified or peeling, then do the following steps:

Peel off all the old paint using PROPAN Paint Remover PPR – 735 (blue can) until it reaches the wall plaster, then clean it and let it dry.
All damaged wall surfaces are repaired using PROCRETE Cement Filler CF – 700 which is mixed with PROCRETE Bonding Agent BDA – 810 and water, then let it dry completely for at least 5 (five) days.
Make sure the water content / humidity of the wall? 16% is measured using a Protimeter tool and the wall alkali content (pH) 7 – 8 is measured using a Universal pH indicator tool.
The wall surface must be cleaned of dirt, dust, grease, oil, remaining cement water and others .

2. Base Coat

Apply 1 (one) coat of ECO EMULSION Alkali Resisting Primer EAR – 4001 (Water Based) without dilution or use DECOR Alkali Resisting Primer AS – 310 (Solvent Based) without dilution using a roll for wall surfaces with very high alkaline levels. Allow this base coat to dry for at least 2 (two) hours.

3. Touch up

Check the entire surface of the wall that has been primed again, if you find that there are still defects such as hairline cracks or small holes, do local repairs using PROCRETE Cement Filler CF – 700 mixed with PROCRETE Bonding Agent BDA – 810 and water, then let it dry for at least 5 (five) days
Re-apply the base paint, specifically on the repaired parts, then let it dry for at least 2 (two) hours

4. Final Coat

Apply 1 (one) coat of ECOSHIELD Acrylic Exterior Shield ES – 600 finish paint, which is diluted with 10 – 20 ?rat of clean water, using a roll. Then let this first coat of finish paint dry for at least 2 (two) hours. REPAINTING (OLD PAINT STILL IN GOOD CONDITION & NOT PEELED)
1. Surface Preparation
If the condition of the old paint is still good, nothing is peeling off, then do the following steps:

Clean the entire surface of the old paint from dust and dirt that sticks to it by washing it using a brush & clean water or a damp cloth, then let it dry, or sand it using sandpaper size 180, then clean it from dust.
Make sure the moisture content / humidity of the wall? 16% was measured using a Protimeter and a wall alkalinity (pH) of 7 – 8 in

2. Base Coat

Apply 1 (one) coat of DECOR Alkali Resisting Primer AS – 310 SB or DECOR Wall Sealer DWS – 380 SB without dilution using a roll. Allow this base coat to dry for a minimum of 2 (two) hours and a maximum of 4 (four) hours.

3. Final Coat

Apply 1 (one) coat of ECOSHIELD Acrylic Exterior Shield ES – 600 finish paint, which is diluted with 10 – 20 ?rat of clean water, using a roll. Then let the first coat of finish paint dry for at least 2 (two) hours.

Related Products

DTX-280

CF - 700

EP-4003