Ultran Marine EL-502
Ultran Marine EL-502
ULTRAN MARINE EL-502 is a series of Ultran Lasur based on high quality urethane alkyd for outdoor building wood and for ship walls made of wood. It has good resistance to sea water and sunlight, thick film with high gloss. Can be used for interiors or exteriors in areas that are not in continuous contact with water. Very suitable for new painting or repainting.
Advantages:
Good resistance to sea water and sunlight
Thick film with high gloss level
Can be used for interior and exterior
Application Procedure
- Sand the surface of the wood with sandpaper no. 180 in the direction of the wood grain and make sure the wood surface is free of dust and dirt.
- Brush I :
Dilute Ultran Marine with 10% – 15% Lasur Thinner. Apply Ultran Marine with brush/spray/roll evenly and let dry for 4 – 6 hours. Dilution in layer I is intended so that the paint can penetrate well into the wood surface. - Sand the threshold with sandpaper no. 400 in the direction of the wood grain and clean it from dust and sandpaper.
- Brush II :
Apply Ultran Lasur Marine with brush/spray/roll evenly (without dilution). Let it dry for 4 – 6 hours. - Brush III & IV:
Apply layer III & IV in the same way as step no. 3 and 4. Leave to dry overnightNote:
For direct use without Color Lasuring Ultran, it must be ensured that the thickness is sufficient (4x layers with application spreadability: 3 m²/lt)
Play Video