Cerakote CTC-998
Cerakote CTC-998
CERAKOTE CTC-998 is a system package for painting old and dirty tiles between rooms such as in the bathroom area, etc. Make new ceramics back without dismantling. CERAKOTE CTC-998 consists of 1 kg-set Waterbased Primer Coat (CTP-980 WB) and 2 kg-set Top Coat (CTC-988) made of high quality resin. Has good adhesion to ceramic tiles and has resistance to household chemicals such as detergent soap, cleaning fluids, etc.
Functions & Advantages:
- Using a waterbased primer, odorless
- Very good adhesion to ceramics
- Excellent water resistance
- Excellent scratch resistance
- Easy to apply, just use a brush or roll
Packaging: 3 lt-set
Application procedure
Application Procedure:
BASE PAINT (CTP – 980)
- Clean the ceramics to be painted from dirt crust, fungus, etc. until completely clean, then sanded, make sure the surface is dry before starting painting
- Mix one set of primer (CTP -980 WB) with a ratio of primary weight of Component A : Primer Component B = 4 : 1. Stir until evenly distributed. For optimal results diluted with 5-10% water (if needed). Mix in moderation as this mixture will harden in 60 minutes. Spreadability is 10 m2/kg-set per coat.
- Lay the mixed primer using an epoxy roll or brush. To get a smooth surface, use a good quality roll.
- After the base paint (CERAKOTE CTP-980) is dry (at least overnight), sand it with sandpaper no. 400. Then, clean the dust from the sandpaper.
- Mix a set of CERAKOTE CTC-998 with a weight ratio of comp. A : comp. B = 4 : 1. Dilute using 5-10% epoxy thinner, stir until smooth.