NEW PAINTING
1. Surface Preparation
- All wall surfaces with defects such as hairline cracks or small holes, repaired using PROCRETE Cement Filler CF – 700 mixed with PROCRETE Bonding Agent BDA – 810 and water, then let it dry for at least 5 (five) days.
- Make sure the water / moisture content of the wall is below 16% measured using the Protimeter tool and the wall alkaline level (pH) 7 – 8 is measured using the Universal pH tool indicator.
- The surface of the wall must be cleaned of dirt, dust, grease, oil, remaining cement water and others.
2. Base Coat
- Apply 1 (one) layer of base coat DECOR Alkali Resisting Primer AR – 300 (Waterbased) without dilution using a roll for wall surfaces with very alkaline levels tall. Allow this base coat to dry for at least 2 (two) hours.
3. Final Coating
- Apply final paint according to exterior or interior needs.
RE-PAINTING (OLD PAINT ALREADY BROKEN & PEELED )
1. Surface Preparation
Check the condition of the old paint that is still attached to the wall, if the old paint is damaged or calcified or peeling, then do the following steps
- Peel off all the old paint using PROPAN Paint Remover PPR – 735 (blue can) until it reaches the wall plaster, then clean it and let it dry.
- All damaged wall surfaces are repaired using PROCRETE Cement Filler CF – 700 mixed with with PROCRETE Bonding Agent BDA – 810 and water, then let it dry completely for at least 5 (five) days.
- Make sure the water content / humidity of the wall is below 16% measured using a Protimeter tool and the wall alkalinity (pH) is 7 – 8 measured using a Universal pH indicator tool.
- The wall surface must be cleaned of dirt, dust, grease, oil, residual cement water and others.
2. Base Coat
- Apply 1 (one) layer of base coat DECOR Alkali Resisting Primer AR – 300 (Waterbased) without dilution using a roll for wall surfaces with very alkaline levels tall. Allow this base coat to dry for at least 2 (two) hours.
3. Final Coat
- Apply the final paint according to the needs of the exterior or interior.
