Decorflex
DECORFLEX DF – 97 Durable Elastomeric Exterior Wallpaint is an elastomeric wall paint that is elastic and flexible in nature so it can cover hairline cracks on walls and prevent water seepage into the walls. DECORFLEX DF-97 Durable Elastomeric Exterior Wallpaint protects exterior walls for at least 8 years from the effects of weather changes, UV rays from the sun and the growth of mold and mildew.
DECORFLEX DF – 97 Durable Elastomeric Exterior Wallpaint is made from polymer acrylic elastomeric combined with selected color pigments, has the advantages of being resistant to alkalis, not easily soiled, easy to clean and washable, bright colors and does not fade easily. This product is formulated for use on exterior walls and ceilings, such as cement brick/stucco masonry walls, precast concrete, GRC panels and others.
Up to 12 years of protection can be achieved with a combination of correct application & a specific color (optional) and a location that is not extreme.
More Information Click www.propanraya.com/en/protection
Functions & Advantages:
- Elastic & flexible
- Can cover hair cracks
- Not easy to get dirty
- Weather resistant for at least 8 years
- Anti-fungus & mildew
- Prevent seepage of rainwater
- Easy to clean and washable
- Water based, does not contain heavy metals and is environmentally friendly
- Green Label Singapore
Packaging: 2.5 Liters and 20 Liters
APPLICATION PROCEDURE
NEW PAINTING
1. Surface Preparation
- The surface of the substrate to be painted must be dry and clean and free from mold, mildew, dust, grease or other contaminants. Use FUNGICIDAL WASH to clean mossy and moldy surfaces.
- All wall surfaces with defects such as hairline cracks or small holes, are repaired using PROCRETE Cement Filler CF – 700 mixed with PROCRETE Bonding Agent BDA – 810 and water, then let it dry for at least 5 (five) days.
- Make sure the water content / moisture content of the wall is 16% measured using a Protimeter tool and the wall alkaline level (pH) 7 – 8 is measured using a Universal pH indicator tool.
- The surface of the wall must be cleaned of dirt, dust, grease, oil, residual cement and others.
2. Base Coat
- Apply 1 (one) layer of base coat DECOR Alkali Resisting Primer AS – 310 (Solvent Based) without dilution using a roll. Allow this base coat to dry for at least 2 (two) hours.
3. Touch Up
- Check the entire surface of the wall that has been primed again, if you find that there are still defects such as hairline cracks or small holes, do local repairs use PROCRETE Cement Filler CF – 700 mixed with PROCRETE Bonding Agent BDA – 810 and water, then let it dry for at least 5 (five) days
- Reapply the base paint, especially on the repaired parts, then leave it dry for at least 2 (two) hours.
4. Final Coat
- Apply 1 (one) layer of DECORFLEX Durable Elastomeric Exterior Wallpaint DF-97 finish paint, which is diluted with 10% clean water by volume, using a roll. Then let the first finish coat of paint dry for at least 2 (two) hours.
REPAINTING (OLD PAINT HAS BEEN BROKEN & PEELED)
1. Surface Preparation
Check the condition of the old paint that is still attached to the wall, if the old paint is damaged or calcified or peeling, then do the following steps:
- Peel off all the old paint using PROPAN Paint Remover PPR – 735 (blue can) until it reaches the wall plaster, then clean and let dry.
- All damaged wall surfaces are repaired using PROCRETE material. > Cement Filler CF – 700 mixed with PROCRETE Bonding Agent BDA – 810 and water, then let it dry completely for at least 5 (five) days.
- Make sure the water content / humidity of the wall is 16% measured using a Protimeter and wall alkaline (pH) 7 – 8 measured using a Universal pH indicator tool.
- The wall surface must be cleaned of dirt, dust, grease, oil, residual cement water and others. >
2. Base Coat
- Apply 1 (one) layer of base coat DECOR Alkali Resisting Primer AS – 310 (Solvent Based) without dilution using a roll. Allow this base coat to dry for at least 2 (two) hours.
3. Touch up
- Check the entire surface of the wall that has been primed again, if you find that there are still defects such as hairline cracks or small holes, do local repairs using PROCRETE Cement Filler CF – 700 mixed with PROCRETE Bonding Agent BDA – 810 and water, then let it dry for at least 5 (five) days
- Re-apply the base paint, specifically on the repaired parts, then let it dry for at least 2 (two) hours.
4. Final Coat
- Apply 1 (one) layer of DECORFLEX Durable Elastomeric Exterior Wallpaint DF – 97 finish paint, which is diluted with 10% clean water by volume, using a roll. Then let the first finish coat of paint dry for at least 2 (two) hours.
REPAINTING (OLD PAINT STILL IN GOOD CONDITION & NOT PEELED)
1. Surface Preparation
If the condition of the old paint is still good, nothing is peeling off, then do the following steps:- Clean the entire surface of the old paint from dust and dirt that sticks to it by washing it using a brush & clean water or a damp cloth, then let it dry, or sand it using sandpaper size 180, then clean it from dust.
- Make sure that the water / moisture content of the wall is 16% measured using the Protimeter tool and the wall alkali content (pH) 7 – 8 is measured using the Universal pH indicator tool
2. Base Coat
- Apply 1 (one) coat of DECOR Alkali Resisting Primer AS – 310 SB or DECOR Wall Sealer DWS – 380 SB without dilution using a roll. Allow this base coat to dry for a minimum of 2 (two) hours and a maximum of 4 (four) hours.
3. Final Coat
- Apply 1 (one) layer of DECORFLEX Durable Elastomeric Exterior Wallpaint DF-97 finish paint, which is diluted with 10% clean water by volume, using a roll. Then let the first finish coat of paint dry for at least 2 (two) hours.