Loading...
Share to :
Eco Gypsum Primer
Eco Gypsum Primer
ECO GYPSUM PRIMER EPG – 4049 is a base paint made from acrylic emulsion. This product is very appropriate to be used as a base paint for painting gypsum ceilings and partitions.
ECO GYPSUM PRIMER EPG – 4049 has good penetration ability to the surface of gypsum and gypsum compound, easy to apply and can bind the remaining sanding particles of gypsum compound which have imperfect adhesion, thus preventing bubbles (peel off) when painting on top of gypsum compound.
Superiority :
- Prevent peel off
- Very good adhesion
Even out the absorption of finish paint by gypsum paper & gypsum compound - Minimize glancing light
Packaged available: 5 kg & 25 kg
Application procedure
Surface Preparation
- Clean the gypsum surface from various kinds of contamination such as: dust, grease, oil and make sure the gypsum surface and gypsum joints it is perfectly closed and even and dry.
- Areas that are damaged, must be repaired first using ECO EMULSION PLAMUR ECP – 4030, then let dry for ± 24 hours or depending on thickness.
Basic layer
- ECO GYPSUM Special Acrylic Emulsion Primer For Gypsum Board EPG – 4049 1 x lapis ( 1 x 20 micron , without dilution).
- Check the entire surface for defects, if defects are found, repair them using ECO EMULSION PLAMUR ECP – 4030, then allow to dry for ± 24 hours or depending on thickness. After that, re-apply the base paint to the repaired parts, then let it dry for at least 2 hours.
Final coat
- ECO GYPSUM Acrylic Emulsion Paint For Gypsum Board EE – 4050 2 – 3 coats (2 – 3 x 30 micron, dilute with clean water 10 – 20% by weight, or according to application needs).