Propan Aqua Stone Care

Application Procedure:

1. The natural stone surface to be painted must be dry and clean and free from mold, mildew, dust, oil or other impurities.
   li>
2. Stir PROPAN AQUA STONE CARE ASC-60 WB without diluting until smooth.
3. Apply with a brush evenly over the entire surface of the natural stone, let it dry.
4. Lay one more layer PROPAN AQUA STONE CARE ASC-60 WB, let dry.

ATTENTION

•  If you want a wet look, PROPAN AQUA STONE CARE ASC – 60 WB can be diluted with clean water up to 50% maximum, stir well before application.
•  The time interval for painting between layers, a minimum of 2 hours (at 30º C).
•  PROPAN AQUA STONE CARE ASC – 60 WB cannot be applied to wet surfaces.
•  PROPAN AQUA STONE CARE ASC – 60 WB cannot be applied to areas that are submerged or areas with continuous water flow.
•  PROPAN AQUA STONE CARE ASC – 60 WB it is recommended not to be applied to floors or road areas with high traffic.