Ultran Politur P-01

APPLICATION PROCEDURE :

1. Sand the wood surface with No. 180 sandpaper in the direction of the wood grain.
2. Close the pores of the wood with IMPRA WOOD FILLER WF-115, let it dry, then sand until the surface of the wood is visible again using sandpaper No. 240.
3. Brush/spray ULTRAN POLITUR P-01 according to the color of choice evenly. Allow to dry 3-4 hours.
4. Sand lightly in the direction of the wood grain with No. 400 sandpaper. Repeat step 3 twice to achieve a semi gloss finish.
5. Untuk mendapatkan tampilan akhir yang gloss/dof, gunakan ULTRAN POLITUR P-01 Clear Gloss/Clear Dof pada penguasan/penyemprotan yang ke-3.

TIPS ON ULTRAN P-01 APPLICATION

•  Use a good quality brush.
• Avoid the application of wood filler too thick, wood filler only serves to fill the pores, excessive wood filler application will cause the adhesion of the paint layer above it to be less good.
•  Make sure to use politur thinner to dilute, do not use other brands of thinner as it will affect the final finishing result.
•  Before re-coating, sanding with sandpaper no. 400 should be done to cut the wood grain and strengthen adhesion.
•  When Ultran P-01 is applied with spray, avoid applying too thick paint per 1 coat, to get optimal results, apply paint thinly and repeatedly.