Polyfloor Cement
POLYFLOOR CEMENT is an epoxy water base paint that is specially formulated as a water barrier so it does not rise to the surface of the substrate or it can also be referred to as a paint that functions to keep the moisture of the substrate within the permissible levels. This product can be applied up to a thickness of 1-3 mm on floors and walls.
This polyfloor cement consists of Polyfloor Cement PFC-225 Sealer, Polyfloor Cement PFC-225 and 235.
1. Polyfloor Cement PFC-225 Sealer
Consists of 2 components that are used as a sealer layer on concrete before the next layer is applied. Applied to concrete / substrate which has a moisture content above 5%. Can be applied to walls or floors.
2. Polyfloor Cement PFC-225 Epocem
It consists of three components, A : B and C (filler). Used as a top coat layer after sealer. Applied to substrates / concrete that have a moisture content above 5%. Can be applied with a film thickness of 2 – 3 mm DFT. Can only be applied to floors
3. Polyfloor Cement PFC-235 Epocem
It consists of three components, A : B and C (filler). Used as a top coat layer after sealer. Applied to substrates / concrete that have a moisture content above 5%. Can be applied with a film thickness of 1 mm DFT. Usually applied to walls
Functions and Advantages:
- Very strong adhesion to the substrate
- Resistant to water and non-slip film coating
- The film coating is very hard and abrasion resistant
- Easy to even
- Odorless and friendly to the environment
- Singapore Green Label Certified
Packaging : 3 kg-set and 20 kg-set
- Mix 1 (one) set of Polyfloor cement, stir until homogeneous.
- Pour the mixture into the substrate according to the recommended material consumption rate.
- Mix 1 (one) set Polyfloor cement, stir until homogeneous.
- Pour the mixture into the substrate according to the recommended material consumption rate.
- For the application of PFC-225 Sealer, flatten it using a squegee.
- For PFC-225 and 235 Epocem applications, mix thoroughly components A and B first until homogeneous, then pour in component C, stir until homogeneous. li>Wait up to 24 hours for ready to use.